Damage Tolerance Analysis in Structural Rehabilitation
The rehabilitation of existing structures requires an evaluation by the structural engineer of past performance to determine the extent of existing damage. Following evaluation of the...
Structural Analysis for Structural Design
This paper presents a simple extension to conventional structural analysis that serves to provide additional information that is of significant use to the structural design process. Specifically,...
Computer-Aided Structural Engineering Software: The Status of Concurrent Engineering
Concurrent engineering encompasses computer-aided engineering (CAE), multidisciplinary CAE (MCAE), computer-aided design and drafting (CADD), computer-aided manufacturing (CAM), computer...
Digital Signal Processing Techniques for Active Structural Control
In the past, implementation of active structural control strategies employing PC-based hardware has been problematic due to excessive computational times required for processing the measured...
Validation of a Continental-Scale Storm Surge Model for the Coast of Delaware
Coastal structures are designed to provide protection against various forces of nature acting in the coastal zone. Structures such as seawalls are expected to provide onshore protection...
Environmental Modeling of Coastal Wetlands
Several useful modeling techniques have been developed for the numerical solution of the vertically integrated Reynolds equations on unstructured grids in wetland environments. The objectives...
Directional Wave Data ? Measurements and Modeling Coast of Florida Erosion and Storm Effects Study
The U.S. Army of Corps of Engineers, Jacksonville District, and the Florida Department of Enviromental Protection are co-sponsors of a study to evaluate the coastal processes along the...
New Technology in Coastal Wave Monitoring
The Coastal Data Informational Program (CDIP) is an extensive network for monitoring waves along the Pacific coastlines of the US. The system has evolved substantially since its inception...
Implementing a National Wave Monitoring Network?Some Lessons and Plans
Most environmental problems involve a chemical and/or biological component and a physical processes component. A holistic approach must consider both components and the way they interact....
The TMA Wave-Energy Constraint and Cohesive Shore-Profile Shapes
A relation by Andreanov between wave-energy loss and nearshore slope, when combined with the TMA wave-energy constraint, is shown to closely approximate the classical Bruun/Dean shape....
An Experimental and Analytical Study of the Shoreline Response to Non-Parallel Breakwaters in Oblique Waves
REsults of an experimental and analysis study single breakwaters on oblique waves are presented. Three orientations of the breakwaters are studied, those being parallel to the shoreline,...
Coastal Engineering Data Retrieval System (CEDRS)
The Coastal Engineering Data Retrieval System (CEDRS) is a menu driven microcomputer resident database which provides both hindcast and measured wind and wave data for use in the field...
The Development of a Wave Data Analysis Standard for a National Wave Measurement Program
The Field Wave Gaging Program (FWGP) at the U.S. Army Corps of Engineers' Coastal Engineering Research Center (CERC) collects and analyzes wave data from around the U.S. coastline to contribute...
Wave Run-Up and Reflection on a Permeable Sea Wall
The swash oscillation on a sloping seawall made of step-shaped concrete blocks, waves and water particle velocity in front of the seawall were measured. It was inferred that incident waves...
Optical Remote Sensing of Wave Surface Kinematics
The measurement of the directional properties of surface slopes, velocities and accelerations is difficult, even in the laboratory, under conditions of steep, random and short-crested...
Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...
The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...
The Use of Crumb Rubber Modifier in Hot-Mix Asphalt
This paper summarizes the literature on the use of CRM as an additive in HMA. Wet and dry processes are discussed and the objective of each explained. Material, design and construction...
Development of Hydro-Scheduling Model for Optimal Joint Operation of Multi-Reservoir Systems
Multipurpose reservoirs in a reservoir system are not limited to supplying ample amounts of water and electricity, but also provide other water demands such as flood control, navigation,...
Probabilistic Characterization of Droughts
The Palmer Drought Severity Index (PDSI) uses a set of meteorologic and hydrologic variables to create a numerical value for drought severity. The index values are grouped into drought...
Return to search